Results 1 to 6 of 6
  1. #1
    Member Sakura's Avatar
    Join Date
    Mar 2017
    Posts
    49

    Getting a new laptop soon

    I'm going to buy a new laptop soon when they go on sale next week. It's so I can use it for a digital imaging class online. However I would like it to be able to run Blender too. So my question is

    When looking for a new laptop what are some good aspects for a laptop that runs or uses Blender?

    I'm not looking for an overly expensive laptop, just some expertise from those experienced when buying one. Feedback would be appreciated, thanks.
    ...



  2. #2
    Member Miss Tiacht's Avatar
    Join Date
    Mar 2017
    Location
    32-Bit
    Posts
    142
    In the current era we live in every single new laptop in the planet is physically capable of running Blender at well over acceptable performance.

    Just make sure it has Windows, or if you're okay with spending a premium for a "pretty" shell then Mac. Avoid Chromebooks and other weird trash computers like the plague. They're terribly designed and extremely cheap and intended for schools.

    Best of luck. I miss my 2011 Asus K53E. :'(
    Primary: Custom Slot 1 PC- Intel Pentium iii Katmai 500Mhz with | 384MB DDR RAM | Nvidia GeForce 6200 PCI 256MB| 10GB Seagate HDD | Windows XP SP2
    Secondary: 1995 Gateway 2000 P5-120- Intel P5 Pentium 120Mhz | 16MB EDO RAM | 1MB Trident GPU | Windows 98 SE



  3. #3
    Check for a graphics card too. A "gamers" laptop comes at a premium, but if you can get a second hand one, it will be appreciated. At the moment, there are plenty of options for online storage of data, so Hard Drive is not an issue if you have regular access to wifi. It may pay if you check the "reviews" of where you buy the laptop, as some places are pretty tight when it comes to refunds and aftercare support.



  4. #4
    Member Sakura's Avatar
    Join Date
    Mar 2017
    Posts
    49
    The one I am looking at will have a terrabyte in the hardrive but the card is a I7 or something? I asked for a Nividia but it wasn't in it. It's a dell I think too. I need to make sure it has a numpad too.
    ...



  5. #5
    Member jagdpanther's Avatar
    Join Date
    Aug 2012
    Location
    Britain
    Posts
    397
    Whatever you do make sure to check the BIOS/UEFI when in the shop to ensure that "secure boot" can be turned off by you? Why? If you ever want to switch from windows to linux you'll likely need to turn secure boot off, and you probably want to keep the possibility of a switch of OS open for the future just incase windows 10 gets even worse.



  6. #6
    Member davidkollmar's Avatar
    Join Date
    Apr 2017
    Location
    In front of my computer
    Posts
    132
    Just my two cents:
    As someone who does a lot of rendering and less hi-poly editing I prefer to sacrifice some CPU performance for a decent GPU. If you do a ton of modeling and almost no rendering then no dedicated GPU will be fine, however, if you are using Cycles (in my opinion) a decent GPU is a must. I would recommend Nvidia, anything above a 750ti would probably be sufficient and 1050ti+ would be great.

    Good Luck and Happy Blending!



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •