Results 1 to 6 of 6
  1. #1

    Reflection in Tunnel Question

    I have a rendering problem I can't solve. This image a simplified version of the project for demo purposes. A ring of lights inside a mirrored tube is the goal. I would imagine we would mostly see the nearest lights reflecting in the mirror cylinder just below the light. But what we end up seeing is this. Depending on the camera position it changes a bit but not as expected. The big problem I'm facing is this point in the tube where there is basically no reflection at all under the lights. I've done lots of tests and nothing led to a solution. (Flipping normals, smoothing, flat, Subdivision Surf, etc.) I feel like maybe someone has experienced this or knows the answer. Thank you.

    Click image for larger version. 

Name:	Screen_Shot_2018_02_08_at_6_46_29_PM.jpg 
Views:	9 
Size:	510.4 KB 
ID:	515046

  2. #2
    Interesting this thing that you have to do, made me curious to try a test, I did not do anything complex, a simple tube with several rings along the way, but the result seems different. below find the file blend.

    Reflection in Tunnel Question .blend
    Click image for larger version. 

Name:	tunnel_01.jpg 
Views:	3 
Size:	357.1 KB 
ID:	515061

  3. #3
    I correct the smooth shading previously only on the first sector of the tunnel now it's different, but i dont know what is your goal.

    Click image for larger version. 

Name:	tunnel_02.jpg 
Views:	3 
Size:	292.9 KB 
ID:	515066
    Click image for larger version. 

Name:	tunnel_03.jpg 
Views:	3 
Size:	292.5 KB 
ID:	515067
    Reflection in Tunnel Question 1.blend

  4. #4
    Thank you for researching this. I looked at your file. It doesn't seem to have the same problem where the reflections stop at a certain distance, but I wasn't able to recreate it in my own file. I stripped my project down and attached hereto.


    It still shows some reflection oddness.

  5. #5
    Hi the problem was related to the camera clipping, increase the clipping distance, in right propriety panel of the camera.

    Camera clipping

    Name:  render_blender-render_camera_object-data_lens-panel.png
Views: 24
Size:  19.2 KB

    And I filliped the normal of tunnel and even the wrong normal of bulb lights, the tunnel now is an subdivided surface with creases edges and with sharp edges.
    Below the result
    Click image for larger version. 

Name:	Test_for_bulb_001.jpg 
Views:	3 
Size:	390.0 KB 
ID:	515182

  6. #6
    Thank you!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts