# How I can improve performance on Blender and Eevee

**URL:** <https://blenderartists.org/t/how-i-can-improve-performance-on-blender-and-eevee/1656814>\
**Category:** Technical Support\
**Created:** [November 5, 2026, 12:39am UTC](https://blenderartists.org/t/how-i-can-improve-performance-on-blender-and-eevee/1656814 "2026-11-05T00:39:25Z")\
**Posts on this page:** 18\
**Page:** 1

<div class="post-metadata">

**Author:** ![Hawk9000](https://blenderartists.org/letter_avatar_proxy/v4/letter/h/ee59a6/32.png) [@Hawk9000](https://blenderartists.org/u/Hawk9000)\
**Post date:** [November 5, 2026, 12:39am UTC](https://blenderartists.org/t/how-i-can-improve-performance-on-blender-and-eevee/1656814/1 "2026-11-05T00:39:25Z")

</div>

Hello, I would like to ask how I can improve performance on Blender, I have a low end PC so I want to keep it the lightest as possible to not force my PC. I also only use lighter artstyles like lowpoly and stylized and retro, so I’m not interested in high graphics, I only want to improve performance and make my scenes lighter.

I’m currently using blender 5.1. Should i use a previous version like 4.0 or so, would that help for better performance, or it’s the same?

I use the Blender Eevee Render, I don’t use Cycles, I would like to know if there’s a way to improve performance with Eevee, mostly during viewport working and navigation

And would like to improve performance on the other Blender parts too, like solid view, material preview

For example, when having Blender idle or in viewport shading solid, it uses around 0.5Vram. is that normal? I’m not sure how that works, so not sure if it should be like that

 ![1](https://blenderartists.org/uploads/default/original/4X/3/6/4/364a5b909cc1b77162736e81836a2dac9a6c9041.png)

On scenes or models with textures on material preview and eevee preview, it goes around up to around 1.5-2 Vram. Is that normal, or it’s too much, I’m not sure because I’m only using lowpoly models and stylized styles and lower resolution textures like 256x256, and only Eevee render engine, shouldn’t it use less Vram than that?

 ![3](https://blenderartists.org/uploads/default/original/4X/6/8/1/681b921e0072a884ef4eff0bc1304848f770b33a.png)

 ![2](https://blenderartists.org/uploads/default/original/4X/5/1/0/510e86ebcb5265f7dc0a80a24d32a90b17228643.png)

I couldn’t find much about all this. If someone knows about it, could you please help me with it. Thank you

---

<div class="post-metadata">

**Author:** ![sozap](https://blenderartists.org/user_avatar/blenderartists.org/sozap/32/443872_2.png) [@sozap](https://blenderartists.org/u/sozap)\
**Post date:** [November 5, 2026, 1:47am UTC](https://blenderartists.org/t/how-i-can-improve-performance-on-blender-and-eevee/1656814/2 "2026-11-05T01:47:52Z")

</div>

Hum, for the blender versions, well you may try 4.1 which is using the old eevee that might be a bit faster and lighter but I’m not sure I’d like that jump in the past…

> [@Hawk9000](#):
>
> when having Blender idle or in viewport shading solid, it uses around 0.5Vram. is that normal?

Yes , blender UI is also using your GPU to draw and to display the viewport, all that should use Vram and GPU power…

> [@Hawk9000](#):
>
> On scenes or models with textures on material preview and eevee preview, it goes around up to around 1.5-2 Vram. Is that normal,

Yes in that case it’s eevee engine that is taking most of that vram… but it’s ok, if you have 4GB, you can probably fit a lot in the remaining space, especially with lowpoly and low res textures.  
You can even do stuff pretty advanced but you have to spend some time optimizing…

Anyway, vram is different from performance, on the overall I think it’s fine , just do some projects and see then if you have issue with them !

---

<div class="post-metadata">

**Author:** ![Hvyron-Animation](https://blenderartists.org/user_avatar/blenderartists.org/hvyron-animation/32/1506857_2.png) [@Hvyron-Animation](https://blenderartists.org/u/Hvyron-Animation)\
**Post date:** [November 5, 2026, 1:59am UTC](https://blenderartists.org/t/how-i-can-improve-performance-on-blender-and-eevee/1656814/4 "2026-11-05T01:59:16Z")

</div>

**Hey! I have a low-end PC too and I also work with low-poly/stylized art. Here is what helps me the most:**

**1. Use the ‘Alt + D’ trick for repeated objects:** When you need to copy trees, houses, or props, use **Alt + D** (Linked Duplicate) instead of Shift + D. It doesn’t duplicate the mesh in memory; it just creates a “link” to the original. It saves a lot of performance and is the best trick for low-end PCs.\*\*

**2. Use ‘Solid’ mode when modeling:** Press Z and choose ‘Solid’. It uses almost nothing from your PC. Only switch to ‘Material Preview’ or ‘Rendered’ when you need to see the final look.\*\*

**3. Hide what you are not using:** If you are working on one object, hide the others (H). The viewport only calculates what is on the screen.\*\*

**I hope this helps! I’m also making a film on a low-end PC, so I know the struggle.**

---

<div class="post-metadata">

**Author:** ![Hawk9000](https://blenderartists.org/letter_avatar_proxy/v4/letter/h/ee59a6/32.png) [@Hawk9000](https://blenderartists.org/u/Hawk9000)\
**Post date:** [November 5, 2026, 3:54am UTC](https://blenderartists.org/t/how-i-can-improve-performance-on-blender-and-eevee/1656814/5 "2026-11-05T03:54:59Z")

</div>

Thanks, that’s good to know, I thought that Vram use was bad, I’m still learning Blender, so I don’t know much about all its different features or how they work

---

<div class="post-metadata">

**Author:** ![Hawk9000](https://blenderartists.org/letter_avatar_proxy/v4/letter/h/ee59a6/32.png) [@Hawk9000](https://blenderartists.org/u/Hawk9000)\
**Post date:** [November 5, 2026, 3:55am UTC](https://blenderartists.org/t/how-i-can-improve-performance-on-blender-and-eevee/1656814/6 "2026-11-05T03:55:28Z")

</div>

Thanks, all that sounds good, I’ll try it out. Using Alt+D to copy objects would be very useful, I used to copy them with Shift+D which made a complete copy of it, that used to fill my scenes a lot, like adding a lot of plants or trees with that added too much polycount. And nice you’re doing stylized art too, it’s a nice style

---

<div class="post-metadata">

**Author:** ![Hawk9000](https://blenderartists.org/letter_avatar_proxy/v4/letter/h/ee59a6/32.png) [@Hawk9000](https://blenderartists.org/u/Hawk9000)\
**Post date:** [November 5, 2026, 4:03am UTC](https://blenderartists.org/t/how-i-can-improve-performance-on-blender-and-eevee/1656814/7 "2026-11-05T04:03:09Z")

</div>

I have other questions, I’m checking out the settings on Eevee, I tried this one on Performance to reduce Shadow Pool, it seemed to reduce Vram use, but on the screen it appears this: -Error: shadow buffer full, may result in missing shadows and lower performance-. I’m not sure about that, is it bad, it’s okay if I ignore it, what’s the best setting for shadow pool?

Would you know more in detail about all these settings on Eevee, and how I can use them to help improve performance and reduce memory use?

 ![1](https://blenderartists.org/uploads/default/original/4X/f/4/3/f431ea4b082b44445018c2a9b4818d42cbdbd282.png)

 ![3](https://blenderartists.org/uploads/default/original/4X/1/d/5/1d598afcfaccd620f26b0b8d2c8ad2cd9ee376af.png)

I also found these settings on the Blender preferences menu, I tried changing them but didn’t seem to have much effect. Can they help too, or I should focus on the Eevee settings instead?

 ![2](https://blenderartists.org/uploads/default/original/4X/1/a/c/1ac66bab7b1b37609be80e1ffbbe1beb8b3e7c18.png)

Could you please help me with this too?. Thanks

---

<div class="post-metadata">

**Author:** ![etn249](https://blenderartists.org/letter_avatar_proxy/v4/letter/e/b19c9b/32.png) [@etn249](https://blenderartists.org/u/etn249)\
**Post date:** [November 5, 2026, 4:21am UTC](https://blenderartists.org/t/how-i-can-improve-performance-on-blender-and-eevee/1656814/8 "2026-11-05T04:21:28Z")

</div>

> [@Hawk9000](#):
>
> Using Alt+D to copy objects would be very useful

Just note that the objects should not have modifiers on them for this to work, or it causes each one to be treated separately again.

> [@Hawk9000](#):
>
> I tried this one on Performance to reduce Shadow Pool

If you lower the shadow pool, you will reduce the max amount of shadows that are allowed to exist in the scene. If you have more shadows than the limit you have set, shadows will start to disappear. This can avoid a crash, but the image will be ruined anyway because of missing shadows, so not really worth it in my opinion.

If you want to save on shadows, I would instead reduce the shadow resolution slider (in the shadow section of the main render settings). It defaults to the max and there is often room to lower it, especially with soft shadows (though maybe not a good idea with cel shading if you need the shadows to be sharp).

In any case, the best thing you can do to make shadows lightweight is limiting the number of shadowed lights, especially if their affected areas overlap.

> [@Hawk9000](#):
>
> I also found these settings on the Blender preferences menu, I tried changing them but didn’t seem to have much effect.

This will change the quality of solid view. If your computer can handle Eevee, there is little point trying to optimize this, as solid view will be faster.

---

<div class="post-metadata">

**Author:** ![Michael\_Campbell](https://blenderartists.org/user_avatar/blenderartists.org/michael_campbell/32/523720_2.png) [@Michael\_Campbell](https://blenderartists.org/u/Michael_Campbell)\
**Post date:** [November 5, 2026, 4:38am UTC](https://blenderartists.org/t/how-i-can-improve-performance-on-blender-and-eevee/1656814/9 "2026-11-05T04:38:17Z")

</div>

I have a few tips here for viewport performance increase on old machines. Useful for EEVEE too:

[![](https://blenderartists.org/uploads/default/original/4X/9/4/2/94270523f3d04bbb1ce940cddaf6b601beb8214e.jpeg "9 tips for a blisteringly fast cycles viewport even on old computers") ](https://www.youtube.com/watch?v=05ld2qWv7K0)

---

<div class="post-metadata">

**Author:** ![Michael\_Campbell](https://blenderartists.org/user_avatar/blenderartists.org/michael_campbell/32/523720_2.png) [@Michael\_Campbell](https://blenderartists.org/u/Michael_Campbell)\
**Post date:** [November 5, 2026, 4:53am UTC](https://blenderartists.org/t/how-i-can-improve-performance-on-blender-and-eevee/1656814/10 "2026-11-05T04:53:41Z")

</div>

You might also consider limiting the viewport texture size via the Blender preferences, try 1024 or 2048 if you don’t have much memory:

 ![image](https://blenderartists.org/uploads/default/original/4X/5/5/4/554ed1f1d3f8a0f217a4d989d5351e17069c738f.png)

---

<div class="post-metadata">

**Author:** ![Michael\_Campbell](https://blenderartists.org/user_avatar/blenderartists.org/michael_campbell/32/523720_2.png) [@Michael\_Campbell](https://blenderartists.org/u/Michael_Campbell)\
**Post date:** [November 5, 2026, 4:55am UTC](https://blenderartists.org/t/how-i-can-improve-performance-on-blender-and-eevee/1656814/11 "2026-11-05T04:55:48Z")

</div>

and try the simplify options to limit the maximum subidvisions globally when you notice a slowdown and are using subdivsion modifiers:

 ![image](https://blenderartists.org/uploads/default/original/4X/7/e/0/7e0629e2054ac0e81144dfabdf8e6aaaefa48bab.png)

---

<div class="post-metadata">

**Author:** ![sozap](https://blenderartists.org/user_avatar/blenderartists.org/sozap/32/443872_2.png) [@sozap](https://blenderartists.org/u/sozap)\
**Post date:** [November 5, 2026, 11:01am UTC](https://blenderartists.org/t/how-i-can-improve-performance-on-blender-and-eevee/1656814/12 "2026-11-05T11:01:39Z")

</div>

Vram is basically the memory of your graphic card, it’s your playground 😃 . You shouldn’t exceed the 4Gb you have, but it’s ok to use the available memory to it’s full extent…

Anyway, I think unless you have an actual issue with your scene you shouldn’t look into optimization right now. But rather make a scene and then when you face an actual problem look into what causes performances issues. Yes you can probably save a few things upfront here and there but it’s more how you will work that will make your scene fast or not. Unless the scene feels sluggish even with the simple scene you demonstrated, in that case I’m not sure a lot can be done anyway…

And just to give you an example of what can be done even with low specs : [Boon & Pimento : Pre-Production](https://blenderartists.org/t/boon-pimento-pre-production/1618248)  
This was done with eevee legacy so a bit lighter at that time, but my GPU had 3GB of Vram when I was working on those images even though I managed to put quite some stuff there…

On the overall the biggest bottleneck for Vram is textures, a lot of lights and shadows can slow down performances which is a different things… Procedural noise , shader to RGB nodes are also sources of slowdowns. Geometry takes vram and heat performances but especially if you’re into lowpoly there isn’t going to be an issue.

On the overall lowpoly style is made to be lightweight so even with low hardware there shouldn’t be issues. You rather should work on some stuff instead of wasting your energy here , unless I’m missing something…

---

<div class="post-metadata">

**Author:** ![Hvyron-Animation](https://blenderartists.org/user_avatar/blenderartists.org/hvyron-animation/32/1506857_2.png) [@Hvyron-Animation](https://blenderartists.org/u/Hvyron-Animation)\
**Post date:** [November 5, 2026, 7:27pm UTC](https://blenderartists.org/t/how-i-can-improve-performance-on-blender-and-eevee/1656814/13 "2026-11-05T19:27:10Z")

</div>

**About the “Shadow buffer full” error:**

It’s not dangerous, but it’s not good to ignore. It means EEVEE ran out of memory for shadows, so some shadows will be missing and performance can drop .

**How to fix it:**

1. **Increase the Shadow Pool Size** (this is the real fix): Go to Render Properties \> Performance \> Memory. Increase “Shadow Pool Size” from the default (512 MB) to 1 GB or higher if your GPU allows . This directly gives EEVEE more room for shadows.

2. **Reduce the Shadow Resolution Limit on lights:** In each light’s settings, increase the “Resolution Limit” value. Higher values = less memory used, at the cost of shadow quality . If you have many lights, do this on the ones that don’t need sharp shadows.

3. **Disable shadows on lights that don’t need them:** If a light doesn’t cast visible shadows, turn off its shadow casting entirely. This is the cheapest fix .

4. **About the other settings (Preferences):** Those preferences you showed (High Quality Normals, etc.) are more about normals and texture filtering. They help a little with memory, but they won’t fix the shadow buffer error. Focus on the Shadow Pool Size first .

5. Remove lights and objects that you don’t use.

**The practical answer:**

Increase Shadow Pool to 1 GB. If the error persists, raise the Resolution Limit on your lights (try 2 or 4). If it still persists, start disabling shadows on lights that don’t need them. Don’t ignore it if you care about the final look.

---

<div class="post-metadata">

**Author:** ![Hawk9000](https://blenderartists.org/letter_avatar_proxy/v4/letter/h/ee59a6/32.png) [@Hawk9000](https://blenderartists.org/u/Hawk9000)\
**Post date:** [November 6, 2026, 12:49am UTC](https://blenderartists.org/t/how-i-can-improve-performance-on-blender-and-eevee/1656814/14 "2026-11-06T00:49:24Z")

</div>

Thank you so much everyone for the replies and suggestions, they were very helpful, I appreciate it 🙂

I’ve been testing all that on some scenes I made before.

Where I mostly had performance problems, like lag or too high vram use, was on bigger scenes, like my star wars desert scene, with lots of objects and so, and many textures, and repeating objects without instances, many lights around. Or smaller scenes with a lot of objects and lights, like my room scene. I fixed both scenes, and fixed those problems like the lights, making object alt+d instances rather than copies, and making some textures and geometry smaller. Now they work a lot better and with good performance 🙂

 ![1](https://blenderartists.org/uploads/default/original/4X/0/1/e/01e0eebd1926b860a1e8bc3d6925a3530e1c9114.png)

 ![2](https://blenderartists.org/uploads/default/original/4X/a/f/e/afe0fb00b152d86034bb909ff88ed5da229707a3.png)

I also found this useful setting to delete unused deleted stuff on the file. On file, purge unused data. It erases deleted objects and material data that remain on the file, it helped deleting that on both scenes

 ![3](https://blenderartists.org/uploads/default/original/4X/9/e/6/9e62b37753e010166351268d674ca8966eeb3b30.png)

> [@sozap](#):
>
> Yes you can probably save a few things upfront here and there but it’s more how you will work that will make your scene fast or not. Unless the scene feels sluggish even with the simple scene you demonstrated, in that case I’m not sure a lot can be done anyway…

That simple scene ran very fast and without problems, I was worried about the vram use thinking it was bad, it’s good to know it isn’t. Where I had performance problems was on my bigger and complex scenes like the room and the desert, but I managed to fix them with all those changes and settings

> [@Hvyron-Animation](#):
>
> **How to fix it:**
> 
> 1. **Increase the Shadow Pool Size** (this is the real fix): Go to Render Properties \> Performance \> Memory. Increase “Shadow Pool Size” from the default (512 MB) to 1 GB or higher if your GPU allows . This directly gives EEVEE more room for shadows.
> 
> 2. **Reduce the Shadow Resolution Limit on lights:** In each light’s settings, increase the “Resolution Limit” value. Higher values = less memory used, at the cost of shadow quality . If you have many lights, do this on the ones that don’t need sharp shadows.
> 
> 3. **Disable shadows on lights that don’t need them:** If a light doesn’t cast visible shadows, turn off its shadow casting entirely. This is the cheapest fix .

> [@etn249](#):
>
> If you lower the shadow pool, you will reduce the max amount of shadows that are allowed to exist in the scene. If you have more shadows than the limit you have set, shadows will start to disappear. This can avoid a crash, but the image will be ruined anyway because of missing shadows, so not really worth it in my opinion.

It helped to reduce shadow resolution on all of them, it also helped having less lights, like a general light for the whole scene, and a few ones on specific points, fixing the settings I managed to keep the 1gb or default 512, or 256 if the scene is smaller or less complex

> [@etn249](#):
>
> > [@Hawk9000](#):
> >
> > Using Alt+D to copy objects would be very useful
> 
> Just note that the objects should not have modifiers on them for this to work, or it causes each one to be treated separately again.

Good to know, I’ll make sure to apply all modifiers before

---

<div class="post-metadata">

**Author:** ![sozap](https://blenderartists.org/user_avatar/blenderartists.org/sozap/32/443872_2.png) [@sozap](https://blenderartists.org/u/sozap)\
**Post date:** [November 7, 2026, 8:51am UTC](https://blenderartists.org/t/how-i-can-improve-performance-on-blender-and-eevee/1656814/15 "2026-11-07T08:51:31Z")

</div>

> [@Hawk9000](#):
>
> I fixed both scenes, and fixed those problems like the lights, making object alt+d instances rather than copies, and making some textures and geometry smaller. Now they work a lot better and with good performance 🙂

Ok that’s cool ! I just wanted to add, when optimizing a scene, it’s good to get some metrics and see where the actual problem comes from. For instance what I would do, is to hit play and see the fps I get, that number I wrote it on a paper.  
Then I compare between eevee and solid view, a slowdown is expected which is normal, but if I have huge slowdown when it’s eevee it’s likely either a light issue or could be a material, or eevee settings.  
If I have not that much difference, then it’s likely that the problem comes from geometry evaluation…

If it’s about geometry I remove chunks to find what makes it slow basically, same for eevee, I try removing lights, removing textures and so on… Each time I make an optimization like using instance, changing lights , I just wrote the fps to see what impact each change is making…

Eventually I made an addon that automates that process, and what I found is that in general there isn’t a lot of things that causes issues. I recall that once I had this character and I could make the rig nearly as twice as fast, because the 4 highlid meshs had uneccesary high subdivision and a few extra costly modifiers. And that was the biggest cause of slowdown, all other changes had much lesser impact.

And most of the time I find similar situation where the real problem comes from one thing in particular that varies depending on the scene. Once someone here couldn’t render a .blend and it turns out they duplicated a super detailled tree mesh like maybe 10 times to make a forest, and that was what filled the ram. So instances there was the solution, but say in your bedroom scene I don’t think using instances or not would make a difference. And even in some case instances can be a source of slowdown too… And if I want to optimize memory I just take note of Vram and Ram usage instead of fps and so on…

My point is, yes you can apply blindly good practices and it’s likely that you’ll fix some issues by doing so, however, if performance is really a concern to you it’s good to take notes on what is causing issues , not only you’ll learn more about blender and performances but you might find out that the cause of slowdown is sometime pretty far from where we would think.

Have fun !

---

<div class="post-metadata">

**Author:** ![Hawk9000](https://blenderartists.org/letter_avatar_proxy/v4/letter/h/ee59a6/32.png) [@Hawk9000](https://blenderartists.org/u/Hawk9000)\
**Post date:** [November 7, 2026, 5:27pm UTC](https://blenderartists.org/t/how-i-can-improve-performance-on-blender-and-eevee/1656814/17 "2026-11-07T17:27:16Z")

</div>

Thank you for all your suggestions, they were very helpful,I’ll have all that in mind to check out the performance for my next scenes 👍

Big geometry and textures used to be one my biggest problems, like in older scenes I made before knowing about that, they got super stuck and slow, specially when I downloaded 3d objects online since they were so big. It helped a lot making the models myself, to make them lowpoly and use lower resolutions as I needed, and reducing those I made before that were bigger like I did on my desert scene

---

<div class="post-metadata">

**Author:** ![sozap](https://blenderartists.org/user_avatar/blenderartists.org/sozap/32/443872_2.png) [@sozap](https://blenderartists.org/u/sozap)\
**Post date:** [November 7, 2026, 6:19pm UTC](https://blenderartists.org/t/how-i-can-improve-performance-on-blender-and-eevee/1656814/18 "2026-11-07T18:19:22Z")

</div>

Cool !  
Generally textures are much more a problem memory wise than actual polycount.  
a 4096x4096 texture will take at least 64Mb of Vram, and in that space you can fill in easily a 500k / 1million triangle mesh. So for a simple lowpoly scene like yours it’s likely that a single texture is taking more than the whole scene.

Especially since a classic PBR asset or materials comes in multiple textures, so say you have color, normal, roughness maps you’re already heating ~200MB of Vram.

But that’s not the only cause of slowdowns, here is an example :  
This is a highly subdivided cube, deformed by a hook :

 ![image](https://blenderartists.org/uploads/default/original/4X/3/0/e/30edaa3249420c6c370a76f08ce2e70ea337821a.png)  
196.600 triangles for an average of 21fps

 ![image](https://blenderartists.org/uploads/default/original/4X/f/e/0/fe06ed8791cd0316cc6c98b054dfab109fd67e6f.png)  
this one has only 74k triangles and runs twice as slow…

The reason is because of the modifiers :

 ![image](https://blenderartists.org/uploads/default/original/4X/5/7/e/57ef688d6cce44fd02c1da5b5010ed00199bfc42.png)  
the mesh is triangulated before being subdivided, which causes extra computations in the subdiv modifier to account for that…

And this was the parameters for the 20fps one :

 ![image](https://blenderartists.org/uploads/default/original/4X/e/f/d/efd9f1de252d3c805dce4a0b2323c68e3f91d96b.png)

My point is , there are general good practice but this can become also quickly complex to know all the cause of slowdowns. In this one it’s more related to animation as navigating the viewport doesn’t impact performance in this case !

Have fun !

---

<div class="post-metadata">

**Author:** ![Hawk9000](https://blenderartists.org/letter_avatar_proxy/v4/letter/h/ee59a6/32.png) [@Hawk9000](https://blenderartists.org/u/Hawk9000)\
**Post date:** [November 7, 2026, 7:22pm UTC](https://blenderartists.org/t/how-i-can-improve-performance-on-blender-and-eevee/1656814/19 "2026-11-07T19:22:20Z")

</div>

Thank you for the suggestions 👍

> [@sozap](#):
>
> Cool !  
> Generally textures are much more a problem memory wise than actual polycount.  
> a 4096x4096 texture will take at least 64Mb of Vram, and in that space you can fill in easily a 500k / 1million triangle mesh. So for a simple lowpoly scene like yours it’s likely that a single texture is taking more than the whole scene.
> 
> Especially since a classic PBR asset or materials comes in multiple textures, so say you have color, normal, roughness maps you’re already heating ~200MB of Vram.

I used to have a lot of trouble with textures on my older projects, sometimes even more than with geometry, it helped a lot reducing them on everything for my new ones. Like using small sizes like 512x512 or lower like 256x256. It also helped using single image textures without PBR, that way I only have one small texture, and since I’m doing lowpoly styles the PBR didn’t add much so It’s not a loss. I’m also practicing doing Texture Atlas for fitting multiple objects textures into one

> [@sozap](#):
>
> But that’s not the only cause of slowdowns, here is an example :  
> This is a highly subdivided cube, deformed by a hook :

Interesting, I’ll have that in mind, it had a lot of triangles and the modifiers

---

<div class="post-metadata">

**Author:** ![system](https://blenderartists.org/uploads/default/original/4X/3/5/9/359f93d9347d57148196b3b4c3f3528f831e2f47.png) [@system](https://blenderartists.org/u/system)\
**Post date:** [November 9, 2026, 7:22pm UTC](https://blenderartists.org/t/how-i-can-improve-performance-on-blender-and-eevee/1656814/20 "2026-11-09T19:22:46Z")

</div>

Closed on November 9, 2026, 7:22pm UTC

This topic was automatically closed 2 days after the last reply. New replies are no longer allowed.
