# Star Wars Turrets

**URL:** <https://blenderartists.org/t/star-wars-turrets/1654124>\
**Category:** Modeling\
**Tags:** modeling\
**Created:** [October 2, 2026, 8:14pm UTC](https://blenderartists.org/t/star-wars-turrets/1654124 "2026-10-02T20:14:26Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![nino\_smt](https://blenderartists.org/letter_avatar_proxy/v4/letter/n/4da419/32.png) [@nino\_smt](https://blenderartists.org/u/nino_smt)\
**Post date:** [October 2, 2026, 8:14pm UTC](https://blenderartists.org/t/star-wars-turrets/1654124/1 "2026-10-02T20:14:26Z")

</div>

Hi everyone, I’m trying to model this Star Wars spaceship turret, but I’m having trouble with the circular part at the base of the barrel. Does anyone know how I could model it? I’m not very experienced with hard-surface modeling on circular shapes, and I’m trying to learn by working on this turret.

 ![RecusantHeavyTurret](https://blenderartists.org/uploads/default/original/4X/e/6/1/e618fa0c80129d1d1bbaffb1b371bb56f6ee497d.png)

---

<div class="post-metadata">

**Author:** ![etn249](https://blenderartists.org/letter_avatar_proxy/v4/letter/e/b19c9b/32.png) [@etn249](https://blenderartists.org/u/etn249)\
**Post date:** [October 2, 2026, 9:07pm UTC](https://blenderartists.org/t/star-wars-turrets/1654124/2 "2026-10-02T21:07:45Z")

</div>

Do you mean this part here, around the base of the gun? It’s the one piece I see here that’s somewhat difficult, so I guess that must be what you mean.

 ![part](https://blenderartists.org/uploads/default/original/4X/9/a/d/9adf3a6c4b67876154b8c1438929986cd3439b72.png)

I would first get the overall shape, then make the hole in it. I am assuming you aren’t using subdivision here, as you didn’t mention it, and I will make a low to mid poly model. If you want a subdivided model, just ask and I can adapt the answer.

1- Start with a quarter of a cylinder.

 ![step_1](https://blenderartists.org/uploads/default/original/4X/9/5/8/95872adc21eead787862b1ce860f1fda6143af41.png)

2- Bevel the edge.

 ![step_2](https://blenderartists.org/uploads/default/original/4X/9/f/0/9f00372ea082e4d922eb3a0d1f8f6fc1ae36ab36.png)

3- Inset the faces.

 ![step_3](https://blenderartists.org/uploads/default/original/4X/9/8/8/9887a8a642113e195406d2c6ed7eaa86174b002b.png)

4- Delete the inset section, slide the vertices to get them away from the corners so there is space for bevels.

 ![step_4](https://blenderartists.org/uploads/default/original/4X/e/6/7/e67ad201bda41df270ff129b89ff943877796f8a.png)

5- Bevel the corners to get the smoothed look of the reference. Dissolve edges if needed to get this result.

 ![step_5](https://blenderartists.org/uploads/default/original/4X/a/a/3/aa34f499c680c05a78b9148f28697d83440c0d4f.png)

6- Finishing touches. I use solidify for thickness, added a fine bevel to the edge of the hole and used weighted normals to make the shading a bit nicer.

 ![done](https://blenderartists.org/uploads/default/original/4X/f/d/8/fd879f663f8ffd9e2b52d176a471fe58e70dca8d.png)

---

<div class="post-metadata">

**Author:** ![nino\_smt](https://blenderartists.org/letter_avatar_proxy/v4/letter/n/4da419/32.png) [@nino\_smt](https://blenderartists.org/u/nino_smt)\
**Post date:** [October 3, 2026, 12:10am UTC](https://blenderartists.org/t/star-wars-turrets/1654124/3 "2026-10-03T00:10:03Z")

</div>

Oh my God, this is perfect, thank you so much.

---

<div class="post-metadata">

**Author:** ![system](https://blenderartists.org/uploads/default/original/4X/3/5/9/359f93d9347d57148196b3b4c3f3528f831e2f47.png) [@system](https://blenderartists.org/u/system)\
**Post date:** [October 5, 2026, 12:10am UTC](https://blenderartists.org/t/star-wars-turrets/1654124/4 "2026-10-05T00:10:36Z")

</div>

Closed on October 5, 2026, 12:10am UTC

This topic was automatically closed 2 days after the last reply. New replies are no longer allowed.
